KEB Elevator Drive Training Seminar

This 16 part video series goes through a full KEB elevator drive training from keypad navigation and troubleshooting to regen units and COMBIVIS 6 commissioning software. You can watch them all in sequence or skip to the topic that you are most interested in learning.

Part 1 | VFD Overview
Part 2 | Keypad Overview
Part 3 | Keypad Navigation
Part 4 | Troubleshooting
Part 5 | Troubleshooting Errors
Part 6 | Hardware & Drive Replacement
Part 7 | Induction & PM motors
Part 8 | Motor Startup & Adjustments
Part 9 | Autotune, SPI and more Adjustments
Part 10 | Speed Control Gains
Part 11 | Motor Learn & Feed Forward Torque Control
Part 12 | Motor Data
Part 13 | Control Modes
Part 14 | Inputs/Functions & Outputs
Part 15 | R6 Regen Units
Part 16 | COMBIVIS 6 Software

Elevator Support Page KEB Elevator Drive Resources
KEB Elevator Drive Training Seminar

VFD Topology Overview

Part 1

KEB Elevator Drive Training Seminar

Keypad Overview

Part 2

KEB Elevator Drive Training Seminar

Keypad Navigation

Part 3

KEB Elevator Drive Training Seminar

Troubleshooting Operational Issues

Part 4

KEB Elevator Drive Training Seminar

Troubleshooting Errors

Part 5

KEB Elevator Drive Training Seminar

Hardware & Drive Replacement

Part 6

KEB Elevator Drive Training Seminar

Difference between Induction & Permanent Magnet motor

Part 7

KEB Elevator Drive Training Seminar

Demo Motor Startup and Adjustments

Part 8

KEB Elevator Drive Training Seminar

Autotune, SPI Learn and Other Adjustments

Part 9

KEB Elevator Drive Training Seminar

Speed Control Gains

Part 10

KEB Elevator Drive Training Seminar

Motor Learn and Feed Forward Torque Control

Part 11

KEB Elevator Drive Training Seminar

Motor Data

Part 12

KEB Elevator Drive Training Seminar

VFD Control Modes

Part 13

KEB Elevator Drive Training Seminar

Inputs, Input Functions, and Outputs

Part 14

KEB Elevator Drive Training Seminar

R6 Line Regen Units

Part 15

KEB Elevator Drive Training Seminar

COMBIVIS 6 Software

Part 16